AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable AC Installation Across Irving
Replacing a central air system in Irving is a different job depending on which side of the city you live on, and we plan for both. A new AC installation here typically runs $3500 – $7500, and the written estimate you get before any work starts sets the final price. That range covers the equipment, the labor, and the small surprises that come with older housing. Our technicians have up to 15 years of experience and are familiar with how systems are built in this city: tight-closet ranch retrofits on one side, vertical-stack and water-source heat pumps in Las Colinas on the other. Call (844) 761-3596 to schedule a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm.
Why Irving Homeowners Call Rutherford AC Repair for AC Installation
We’re a repair-first company. AC repair is our flagship service, and we only recommend a new install when the repairs stop making financial sense. That mindset carries into installation: we size the new system to your house, not to a sales quota, and we go over the options in plain language instead of steering you toward a particular manufacturer.
We work on the brands most Irving homes already have, including York, Daikin, Bryant, and American Standard. When we diagnose a system before a changeout, we’re not guessing at unfamiliar equipment.
Irving has its own mix of work. Older neighborhoods like the Heritage District and south Irving have 1950s-70s ranches with small closets and low attic runs. Las Colinas has high-rise corridors where the equipment sits in tight, purpose-built rooms. We handle those two kinds of installation as one job category, because that’s what serving Irving actually requires.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
Furnace Installation in Irving
Furnace Installation in Irving comes up most often when a system is ageing out at the same time as the AC, and pairing the two jobs keeps the house on one compatible setup. In older Irving homes, the furnace often sits in a closet or attic space that was sized for a smaller unit decades ago. We measure that space, check the flue or venting path, and confirm the gas line and electrical panel before the equipment is ordered. Typical estimated cost in Irving is $3500 – $7500, with a written estimate setting the final price.
When a Furnace Needs Replacing
A furnace that has failed heat exchanger checks or is spending more on repairs than it’s worth is a candidate for replacement. If the heat pump side of a combined system is still healthy, a straight furnace swap may be all you need. We’ll tell you which path makes sense.
Inside the Work
The job involves removing the old unit, checking the venting and duct connections, setting and levelling the new furnace, and running a full start-up with a combustion check. We test the system through a heat cycle before we leave.
HVAC Installation in Irving
HVAC Installation in Irving is a single coordinated job when the AC and furnace are both due, and doing it that way avoids mismatched equipment and duplicate labor. A full-system replacement involves load calculation, equipment selection for both cooling and heating, duct verification, and a start-up on both sides. Estimated cost in Irving runs $3500 – $7500, with a free written estimate that sets the final price. Our AC installation team handles the cooling side and coordinates the heating side through the same one company.
Load Calculation and Sizing
We size from room-by-room measurements, window orientation, insulation, and duct conditions, not just the old unit’s label. The original equipment was often the wrong size to begin with. Getting it right matters more in Irving’s long summers than almost anywhere in the Metroplex.
Coordinating the Changeover
Changeover day is scheduled in advance, with the install date confirmed before ordering. We handle the permit paperwork and walk you through the system after the job. One phone number covers both the cooling and the heating season.
Trusted Brands We Service in Irving
We’re factory-familiar with nine of the most widely installed residential brands, including Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. That means whether you own a York system in a Heritage District ranch or a Bryant in a south Irving cottage, our technicians recognize the equipment and its usual failure points. We don’t claim to stock parts or run a local warehouse; what we bring is familiarity and the ability to source the right components quickly. When you get a bid, the brand already in your home can often be matched with its current-generation equivalent, which keeps retrofit work simpler.
See the difference
Before
After
Before
After
Before
AfterCommon AC Installation Problems We See in Irving Homes
- Undersized closets in 1950s ranches. Modern, larger-tonnage air handlers and condensers don’t always fit the original closet or attic space. We verify static pressure and may rework the return duct or relocate equipment to make it work.
- High-rise vertical-stack systems in Las Colinas. These units need custom brackets and tight-tolerance refrigerant lines. A mismatch in fit causes vibration and noise complaints that carry straight into neighboring units.
- Post-storm electrical damage. Hail and wind around DFW Airport bring power surges that fry capacitors and control boards. We check the electrical panel and add surge protection before any new install.
- Clay soils and pier-and-beam foundations. Irving’s shifting clay and pier-and-beam construction cause duct disconnects and static pressure imbalances. A new system alone won’t fix those; the ductwork has to be addressed.
Pricing for AC Installation in Irving, TX
Here’s what to expect for a typical installation in Irving. Our estimates are free, and the written estimate is what you pay.
| Service | Typical Estimated Range |
|---|---|
| AC Installation | $3500 – $7500 |
| Furnace Installation | $3500 – $7500 |
| HVAC Installation | $3500 – $7500 |
What pushes a job toward the top of that range? Tight closet access, duct rework for static pressure, equipment relocation, and surge protection add-ons. A straightforward swap in a home with adequate attic space and clean ductwork tends to land lower. We give you a written price before the work starts, and the estimate is free.
We Also Serve Cities Near Irving
We also serve homeowners in Carrollton, Dallas, Grand Prairie, and Lewisville, plus the surrounding Metroplex. If your home sits on a city line or you’re not sure which city’s permit process applies, call us and we’ll sort it out. Our focus is the same across every city we serve: a written estimate, a scheduled install date, and a start-up that confirms both cooling and heating work.
Serving Irving, TX – Our Local Coverage Area
We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About AC Installation in Irving
Yes. Vertical-stack and water-source heat pump systems are a normal part of Las Colinas work, and we size and bracket them to fit the tight equipment rooms these buildings use. Call (844) 761-3596 for a free estimate.
Usually, yes, but not always in the same spot. In older Irving ranches, the closet or attic space is often too tight for modern equipment, so we verify static pressure and may rework the return duct or relocate the unit. Call us for a free on-site estimate.
Most cities require a permit for a full AC replacement, and Irving is no exception in that regard, so ask the city’s building department to confirm the current rule for your job. We can help you navigate the permit requirements. Call (844) 761-3596 to get started.
Spring and summer hail and wind around DFW Airport drive power surges that damage capacitors and control boards, so we check the electrical panel on every install and can add surge protection. Call us to discuss surge protection with your new install.
We size from room measurements, window orientation, insulation, and duct conditions, not from the old unit’s label, which is often already wrong. Call (844) 761-3596 and we’ll run a proper load calculation for your home.
Ready to plan a new system? Call Rutherford AC Repair at (844) 761-3596 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Rutherford AC Repair.